спасибо, это есть и есть на сайте европейском, это ТОЛЬКО откат автопилота
Добавлено позже (22 Май 2017 - 16:28)
а вот инструкция по смене региона (из кэша ибо yuneecpilot лежит) http://webcache.googleusercontent.com/search?q=cache:yuneecpilots.com/threads/howto-update-e-f-j-k-to-standard-a-firmware-if-latest-version-is-already-installed-v3-04.3133/
Update steps
- Download the patched firmware from the download link above. (скачиваем пропатченную(!) прошивку)
- Copy the downloaded file in the root directory of your SD card.
- Insert SD card into the CGO3+ and power on the Typhoon H and the ST16.
- After the CGO3+ is connected (and you have a live stream on the screen) select "System Settings" -> "About Controller" and hit the second "UPDATE" button (Typhoon-H section).
- Now the files will be decompressed and the CGO3+ is updated.
- Wait until the process is done and you get a "Please restart aircraft" message. The CGO3+ is now blinking purple and after a few seconds the camera shuts down. The LED of the CGO3+ should be off then.
- Power off the Typhoon H and start it again.
- Now you have the A version installed. You can verify that in the "About Controller" screen on the ST16.
как изменить прошивку
How to use the batch script
- Download the A version (TyphoonH_Ver3.04_A.bin) firmware from the Yuneec Homepage.
- Download the attached Zip file in this thread post.
- Unpack the Zip file and put the downloaded firmware (TyphoonH_Ver3.04_A.bin) inside this folder.
- Run the batch script, by double clicking the "firmware_patcher_v3.04.cmd" file.
- The script will output a few informations and a final message: "Done". You can now flash TyphoonH_Ver3.04_A.bin. Have fun!"
- Continue with the flash Howto above.
все манимуляции именно с переименование файла
So I renamed the file
"cgo3+gb_3.2.07_LC2_A_firmware_30207.bin"
to
"cgo3+gb_3.2.08_LC2_A_firmware_30208.bin"
я был очень близок :rofl:
[attachment=16738:firmware_patcher_v3.04.zip]
Добавлено позже (22 Май 2017 - 18:48)
----
но это не корректно ;) русский сервис готов прошить нужным софтом любую прошивку
софт не дадут, шьют через порт на камере
Edited by costarika, 22 мая 2017 - 04:35 .
